linerinteractive.blogg.se - Gigabyte image tool error failed to

#Gigabyte image tool error failed to drivers#
#Gigabyte image tool error failed to software#

Be sure the device is properly installed.

#Gigabyte image tool error failed to drivers#

Be sure the latest device drivers are installed.

For more information, see the server and operating system documentation.

Verify that the server and operating system support the device.

Be sure all boards are properly installed in the server.

Be sure all switch settings are set correctly.

If the new hardware is not configured properly, you may receive a POST error message indicating a configuration error.

After installing or replacing boards or other options, verify that the system recognizes all changes to the hardware in the BIOS or in the options setup in UEFI System Utilities.

Uninstall any incorrect drivers before installing the correct drivers. For example, if you are using a RAID controller, you need the latest RAID Controller device driver.

#Gigabyte image tool error failed to software#

Be sure all necessary software updates, such as device drivers, ROM updates, and patches, are installed and current, and the correct version for the hardware is installed.

Be sure other components were not accidentally unseated during the installation of the new hardware component.

Be sure all cables are connected to the correct locations and are the correct lengths.

Be sure no memory, I/O, or interrupt conflicts exist.

To be sure all requirements are met, see the device, server, and OS documentation.

Be sure the new hardware is installed properly.

For more information, see the release notes included with the hardware. Be sure the issue is not caused by a change to the hardware release.If necessary, remove unsupported hardware.Be sure the hardware being installed is a supported option on the server.Connection of the data cable, but not the power cable, of a new device.Incomplete population of a memory bank.If running a redundant configuration, be sure that all of the power supplies in the system have the same part number and are supported by the server.Remove the newly added component and if the issue is no longer present, then additional power supplies are required. Be sure the system has enough power, particularly if you recently added hardware, such as drives.If the power source is working properly, then replace the power supply.If the LEDs indicate an issue with a power supply (red, amber, or off), then check the power source.If the power supplies have LEDs, be sure they indicate that each power supply is working properly.Redundant power supplies are configured but the power supplies are not compatible.The power is not sufficient for the hardware installed.The power supply is not supported on the server.The power supply has exceeded the current limit.The power supply might not be fully seated.Be sure there is sufficient power allocation to support the server.Have a qualified electrician check the line voltage to be sure it meets the required specifications.Be sure the proper circuit breaker is in the On position.

Replace the power strip with a known functional power strip to be sure it is not faulty.Replace the power cord with a known functional power cord to be sure it is not faulty.Also, be sure the power source meets applicable standards. Plug another device into the grounded power outlet to be sure the outlet works.If the server has a Power button that returns to its original position after being pressed, be sure you press the switch firmly. Press the Power button to be sure it is on.Sufficient power is not allocated to support the server.The line voltage is insufficient for the load.The circuit breaker is in the off position.The grounded power outlet is not working.Components or cables might not be properly connected or seated.